Cast iron tiger clamps, as a common connecting component, are widely used in various steel structure connections due to their high strength and excellent wear resistance. When it is necessary to connect cast iron tiger clamps with steel beams, to ensure the safety and stability of the connection, we need to adopt some professional methods and techniques. Below, we will provide a detailed introduction to the usage method of cast iron tiger clamps on steel beams, so that you can better complete the connection of steel structures.

1. Preparations

Before starting the connection, it is essential to ensure that the surfaces of the cast iron tiger card and the steel beam are clean, free of oil stains, rust and other impurities. This helps to ensure the tight fit of the connecting parts and improve the connection effect. Meanwhile, prepare the necessary connection tools, such as wrenches, bolts, etc.

2. Install the cast iron tiger card

Place the cast iron tiger clamps at the predetermined positions of the steel beams to ensure that the clamps are closely attached to the steel beams. Then, use tools such as a wrench to pass the bolt through the hole of the cast iron tiger clamp and tighten it on the other side of the steel beam. During the tightening process, it is necessary to ensure the verticality of the bolts to avoid generating excessive eccentric torque.

3. Check the connection effect

After the installation is completed, the connection effect should be checked. Check whether the connection is tight and loose by observing whether it is firm, and use methods such as knocking to test whether the connection is firm. If problems are found, adjustments and repairs should be made in a timely manner.

4. Precautions

During the connection process, the following points should be noted: Firstly, select the appropriate cast iron tiger pin and bolt specifications to ensure that the connection strength meets the requirements; Secondly, during installation, keep the connecting parts vertical and parallel to avoid generating excessive stress. Finally, it is necessary to regularly inspect the condition of the connection points and promptly identify and address any issues.

Through the above steps, we can firmly connect the cast iron tiger card to the steel beam, achieving a firm connection of the steel structure. In practical applications, it is also necessary to select the appropriate connection method and tools based on specific circumstances to ensure the security and stability of the connection. It is hoped that the introduction in this article can be of help to you and enable you to handle the connection process between the cast iron tiger card and the steel beam more skillfully.